Jan 29, 2015 Update: Snow shenanigans, green growing things @ MITERS

hmm, a lot of snow happened

fan sled?

https://www.youtube.com/watch?v=w0IGhmKxNY0

ski EV bike -> motor fire ūüôĀ

https://www.youtube.com/watch?v=SCIw5v9vZ4k

and ski scooter… video from recent blizzard sometime soon, in the meantime:

http://transistor-man.com/electricscooter_tundraupgrades.html

Tundra Mode from Dane Kouttron on Vimeo.

 

 

here are some green things growing at MITERS

P1070284

mung bean sprouts!

P1070286

 

mango trees! they were doing well until we moved them up there (because the mice were nesting in them) and now we keep forgetting to water them :/ they’re… two years old at this point?

 

oops just kidding, that last one isn’t growing, it’s just drying. it is green though.

 

HI MITERS!

Lots of stuff has happened!

Yay!

A Honk band came to visit.

20131011_222203

20131011_232857

 

We had a meeting!

20130907_193901

 

We went to Maker Faire! Lots of electric vehicles arrived:

20130921_094001

It was raining so we set up a tarp.

20130921_100751

 

Also we tried to fly kites but it was too crowded to fly them for long.

20130921_130414

Cappie and Sheep made t-shirts. It was possibly their first project at MITERS.

20130905_183710

20130905_182854

There was carbon-fiber epoxy shenanigans!

20131019_011328

 

Okay other members of MITERS! Go forth and blog!

Photodump, March 2013

a photodump of happenings at MITERS lately

we cleaned.

a lot. (you can’t tell really tell it now. people, clean up after yourselves!)

we even threw stuff away!

we fixed the “MIT Sloan School phone” that people can use to call MITERS to be let in after daylight hours

(well, as of 1 april 2013 it broke again and is super quiet… if you amplify it up to be audible you also get a lot of buzzing noise. to be fixed)

 

also there was yurt building

it disassembles into something amazingly small and portable

that’s all. oh, by the way, the future is going to be awesome.

What is a MITERS?

Hullo there!
A lot of things have happened since August. Two particular things of note have been seminars and maker faire (oh, and NHK filming, but more news about that’ll come out in a few months). I was going to write blog posts on these topics, but then I realized to explain the history of the seminars, I would need to dig deeper into the past.

hi rather outdated fall seminar series flyers

what is a miters

To clarify why I’m writing this blog post, I’m currently the president of MITERS, but not for much longer, and I want to record my thoughts.¬†Officers are elected in the spring term to provide continuity from one “generation” of officers to the next, so the outgoing officers, if they are seniors, have a chance to relay their knowledge. So I’ve been president since last February, and my term is coming to a close soon.

In early March of this year, I called a meeting to flesh out what I wanted to do during my term as dictator. After some discussion I got a consensus on what exactly MITERS is about vision-wise (it was pretty different from what I personally thought it was about). Of course, what MITERS is about is entirely what we decide as a community, so this may or may not hold true next year. But for my term…

MITERS draws people in because of our fun / crazy projects. We are a student group promoting making things for the fun of it.

Hold on. Wait. There’s a prequel to explain how, exactly, a seminar series fits this vision.

intimidating MITERS?

In late December of the previous term (when¬†muffin was president :D), I’d sent out this survey to all the MIT dorms. My goals as president came almost directly from insights gleaned from that survey.

Like the seminars, the issue of how MITERS is perceived is a subject near and dear to my heart. I first heard about MITERS when I was a wee prefrosh at CPW. I’d heard about LED’d prom dresses and decided I wanted to do that too, but I didn’t have LEDs and I didn’t know how to turn them on. I asked my host where I could find them, and that’s how I first came to MITERS.

Sun, Apr 19, 2009 at 2:43 PM
Hi hi,
Thanks so much, I was able to swing by and grab a lot of¬†LEDs. Err, like 12. It was sort of awkward b/c I just randomly dropped in, and I left before saying thanks .__. If you see any MITERS people, please tell them the random prefrosh said thanks a lot! And that I’ll return the favor in half a year or so.

Thanks,
–Nancy

Muffin was the first person I talked to at MITERS, I think. He attempted to show me how an LED worked, but the battery was dead. I forgot what else happened, but I left shortly thereafter. ¬†(also, I didn’t figure out / have enough time to LED my prom dress ~__~).

In fact,¬†Amy and Charles (also former MITERS presidents) both lived on my hall, and yet it definitely didn’t stop feeling awkward hanging out there until a year later. If they hadn’t lived on my hall, I probably wouldn’t even have stuck around long enough to overcome that initial awkwardness (common to any close-knit club you join). I didn’t really start hanging out there until the year I took 2.007 (second semester sophomore year, spring 2011) and was working on a hexapod and “had a project to work on.”

hi hexapod <3 back before I broke your servo controller and lost one of your legs ;___; uweh

Also, holy crap, 2011. That was last year. o___o?! Well, to be fair I’d been filling out forms for MITERS for a while before then.

Where was I going with this? Right. I definitely found MITERS pretty intimidating and informally felt that many people felt the same way. So I did the survey thing! There was interesting data even if it’s likely in that so-unscientific-it’s-worse-than-not-doing-a-survey range of misleading. Here are the results from the main question in the survey.

Shiny graph summaries

The question:

Were you ever intimidated by MITERS?
“whoa these people are so awesome, it’s so awkward when I ask n00b questions, etc.”

  • yes, but now I hang out at MITERS
  • yes, that’s why i don’t hang out at MITERS
  • no

So actually I’m always concerned about gender issues, and (and yes, there was a “neither” option for gender, but there was only one response for that category) and that was the main hypothesis driving my creation of this survey. Here are some gender-based results:

Conclusion: A lot of people (who have heard of MITERS and responded to this survey) find MITERS intimidating. And it does appear that females are more likely to be intimidated than males.

 

Quotes from that same survey

I also found the answers to the “what else” question quite elucidating. They form the main basis for what I aimed to achieve as president.

In particular, here is a selection of quotes: *

~ i was just sort of intimidated at the beginning of the year. in general, I was asking around if I could help with projects or get some help starting mine. however the response I was getting was generally that I should start my own project, which is sort of intimidating for a freshman with limited design experience.
~ Mostly it just wasn’t super welcoming – walking in you’re mostly ignored which can be intimidating for a new person. Its totally fine now that I know some people though.
~ I’ve gone to MITERS before, and sort of been at a loss for what to do. Not intimated, per se, but just sort of confused.
~ MITERS is full of super-competent types who are all working on their own projects. It feels like a place that you go once you have experience, not to screw around and make mistakes while you’re learning. It’s hard to feel like you can do much, or that you belong there, when you’re flanked only by people who have built ridiculous robots, and you’re the only noob

*I’m doing this unethical thing where I said I’d only quote people to keyholders, but I’m making the executive judgment that it’s been sufficiently long ago and the answers completely devoid of identifying information that a few quotes will be a-okay.

Neglecting whether we should INVITE ALL THE EVERYONE EVER to already-extremely-disorganized thing that is MITERS, I, from my own personal agenda, was all I FEEL FOR YOU ALSO I’M GLAD I’M NOT THE ONLY ONE. ūüėÄ So then I dragged the rest of MITERS along.

Okay I am getting more sleep-deprived as I write this post.

The main conclusion was that build parties were not really helping new people feel more comfortable at MITERS. At a general meeting, we decided that we should revamp build parties and try to make them more welcoming, for instance by having a kit project that seedlings could work on and having an group introduction sometime during the night so that people could get a better sense of what was going on at MITERS.

what is a miters pt2

In late May I did a recap of things I wanted to happen during fall term.

Vision:
Encourage more individual crazy / fun projects at MIT.

Goals:
Have more people know about MITERS (publicity)
Have more people become keyholders (non-intimidating)

Task list:
~ publicity

Project grants
Stickers and t-shirts
Seminars (share generally useful skills)
Lightning talks (present your own work)
~ non-intimidating
Seminars (for an hour, replace build parties with introduction + seminar)
Project Class (easy project for frosh to work on)

The basic idea was that we wanted to make sure people who wanted to come weren’t prevented by being intimidated, and professors and administration better knew what we stood for.

1)¬†The project grants worked out o.k. We kept it to non-MITERS people. Mostly the grantees got hosed and didn’t finish their projects, and/or only came to MITERS to pick up their parts.

2) The posters worked out great. Alex postered and then we forgot about it. X___x i should get that going again this semester. yay thanks timyang and atw.

3) We never got around to having a kit project that seedlings worked on at MITERS. Instead, we implemented

4) seminarrrrrs

So, finally we come to the topic of seminars. Of course now I am tired and so the part about seminars will actually be really brief.

I started them last semester, a bit informally. They were relatively sparsely attended and were just random topics people volunteered to talk about.

Elaina: “eagle: things i wish i knew when i started”

This semester, we actually organized a series of topics.

As you may have heard, we are running seminars this semester. This is to un-intimidate new people and should serve to make us better known for all the awesome we are among The Real People (profs, administration). The overall theme is “learn about microcontrollers.”

Amazingly enough, somehow each seminar has happened. For disorganized MITERS, this is pretty impressive. @___@

but…

In terms of actually fulfilling the goal of welcoming people to MITERS, the main issue is that, to accommodate more than ten people, the seminars are held upstairs on the third floor (thanks IDC!) of the same building. However, people seem to be just treating it as a class so far. In general is fine (more people should be introduced to building things for fun!), but perhaps we need to be more explicit that part of the point is to get people to feel comfortable hanging out MITERS. Many people never even see MITERS. x___x so I will be trying to fix that in the upcoming seminars. Some possibilities:

  • have food on at MITERS to lure people back down afterward
  • give a short presentation on MITERS and why we are running this series at the beginning of each seminar

Some pictures

Actually, this post began as “I should share the picture I took of the seminars!” And so, finally, we are here.

Seminar 1: 555s! We had people make blinky LED circuits on a breadboard.

I taught the first seminar, and Peter helped actually make it not fail.

Lots of people!

A closeup of a circuit-in-progress.

Seminar 2: 555s again. Bayley taught it this time around.

Ah, debugging. The greatest of skills.

Seminar 3: Solidworks 1 (parts). Charles taught this using his 2.007 TA experiences. They modeled motors and learned to use calipers as well.

Charles: If there are any blue lines (unfixed dimensions), I will give you zero points.

Seminar 4: Solidworks 2 (assemblies). Charles taught this too.

Seminar 5: Eagle 1 (schematics). Dane

The next one (today) will be taught by Dane and will involve routing and ordering boards. We’ll actually be combining all the boards people make into one board and ordering them thanks to support from advanced circuits.

conclusion

MITERS! We are friendly, and you should come help MITERS be more awesome. Also you should build things regardless of whether it’s at MITERS or not ūüôā

Additional thing which I learned:

  • print out circuit diagrams (e.g. 555s, resistor values, the eagle schematic)
  • good idea to have a working circuit example as well, and to organize components into kits
  • get the seedlings themselves to sort out the components after they are done with them ūüôā
  • just abuse jumpers, don’t bother stripping tons of little wires for people
  • don’t forget, 555s can run off of battery packs. for a long time i was trying to figure out how to run power lines from power supplies to dozens of people… derp.
  • get a bright projector! kind of expensive though
  • lots of TAs crucial — helpful for TAs to have some idea of what the seminar will cover beforehand
  • definitely useful for TAs to proactively wander around and ask people if they need help — not everyone will immediately raise their hands to ask for help
  • people will show up on a Friday night even without food or getting any sort of course credit
  • holy crap lots of people will show up
  • rsvp less crucial than you might think (seminars can be repeated, not ideal but people can be put in groups, software sessions can be fairly flexible enrollment as long as you have lots of TAs)
  • take lots of pictures!
  • make sign-in sheets, they will help justify any funding requests
  • provide really really detailed instructions for installing software to eliminate any uncertainty
  • expect that some people will show up without installing the software regardless. try not to be too exasperated
  • hand out link to feedback form on slips of paper or at the seminar, people will forget if you just email out

Yay! That’s it for now. The next installment will most likely cover our trip to Maker Faire NYC. ¬†Actually, this has been covered by expert bloggers Shane and Charles already, so I might not write this post. *scratches head* Otherwise, I might just do biweekly updates on the happenings at MITERS. Like swapfest parrots.

–Nancy

Were you ever intimidated by MITERS?

Hi friends!

I want to figure out if awesome people (yes, all of you) being intimidated away from MITERS is a common phenomenon so I made a form consisting of the following questions. You can email me or be anonymous and use the form ūüėÄ
Were you ever intimidated by MITERS?
Gender
Year of Graduation
major or minor or w/e
The individual responses (not aggregated) will only be viewed by me, I may quote things to keyholders unless you explicitly state it’s a private response¬† -^-^-
Cheers,
–Nancy

Nyancat party

Update: 11/26/11

I made nyancake! It was more difficult than I thought it would be. “In other news this week, hall thanksgiving feast. Nyancake makes its appearance. Trickier than I thought. Sprinkles did not turn out at all (too fine featured), cake should not be too moist (add flour). Bake at ~325F for ~1.5hrs, then (when brown on ‚Äútop‚ÄĚ) pull out and invert. Let cool for ten or twenty minutes, then gently shake out. Make sure to use cooking spray as mold release!” This used $17 worth of food-grade silicone, and I just barely made it by adding a top to the mold with foam to displace the silicone where it wasn’t needed in the mold.

As a whole, jello is much more recommended, but has more limited post-processing (aka adding food coloring / frosting) options.

More pics: https://picasaweb.google.com/nancy.ouyang/Nyancake?authuser=0&feat=directlink

Update: 11/02/11

I finally managed to not eat poptarts long enough to drag them from Shaw’s, the grocery store, to the media lab shop (this has taken me 2 months, hah). Now I have replicated the work of http://www.lvl1.org/2011/07/15/new-laser-cutter/ and created laser-etched nyancat poptarts!

MATERIAL:        LENS:    THICKNESS:    PPI:     POWER (%):    SPEED (%):    EFFECT (cut/etch)

Poptart            2    n/a        500    40%        80%        Light raster (will cut through sugar but not burn poptart)
Poptart            2    n/a        500    40%        50%        Medium raster (will cut through sugar and lightly singe poptart)
Poptart            2    n/a        500    76%        50%        Strong raster (will cut through sugar and darkly singe poptart)

on the universal laser x2-600 (co2, 100w).

=====

An update from rapid-prototyping land.
I have access to a shopbot and CNC mill now, which means I can now create infinity nyancats!

(there was this really awkward moment in the media lab shop where these sponsor-y people walked in and looked around and took pictures. While I had nyancat on my screen and I was using this 50k shopbot 3d axis mill to … cut internet memes out of foam).


Foam to smooth-on liquid silicone (in this case, mold star slow, which has a long pot time to work with — 50 mins — but takes 4 hours to cure. the quick-curing oomoo 25 was out) to drystone final (similar to plaster — a white powder, mix with water and let stand for a few hours). No release agents needed at any step, although I had to pry the silicone out of the foam, destroying the mold a bit.

Final drystone version had bad surface finish due to the bad surface finishing on the foam (I was trying to cut down on my shopbot milling time) — professor suggested coating foam version in gesso next time to create a better finish. I also lost a sprinkle on the foam somewhere, and was not careful enough pouring the drystone into the silicone mold as you can tell from the uneven depth of the sprinkles.

Aluminum paperweight (engraved on a CNC mill) > oomax silicone (cured in ~1hr) > drystone (cured in ~1hr) and a black smooth-on plastic (cured in 15 mins). There are tiny bubbles in the silicone version along the raised lines, probably because I needed to be more careful making sure the oomax poured all the way into the tiny etched grooves.

Software toolchain:

google images (nyancat) > Solidworks (3d model / dxf) > MasterCAM for the aluminum paperweight, Partworks for the shopbot foam mold.

More details here:
http://orangenarwhals.blogspot.com/2011/10/nyancat-party-in-aluminum-egg-foam.html

and more pictures here:

Nyanmold: https://picasaweb.google.com/nancy.ouyang/MAS863Week6MoldingAndCasting?authuser=0&feat=directlink

Nyantart:  https://picasaweb.google.com/nancy.ouyang/Nyantart?authuser=0&feat=directlink

Makerships! (free project money!) apps due Oct 11

Update– now we’re awarding $750 in total! Thanks to techfair — techfair.mit.edu ūüôā

MITERS wants to give you money (“makerships”) to work on your own projects.
Apply here by Tuesday the 11th (it’s a short and sweet form):
https://docs.google.com/spreadsheet/viewform?formkey=dDViZV9TVng0dFRWQ3pMVzI0aDVOdUE6MQ

The details follow…

Makerships:
We want to give you money for your projects. We’re allocating $500 a
semester toward grants for student (undergraduates only for now)
projects. (So requesting up to $100 or $200 is within reason, although
smaller requests are more likely to be granted).

MITERS:
MIT Electronics Research Society (http://miters.mit.edu)
Originally founded as a club to give MIT students free and open access
to computers, MITERS now features a mill, lathe, band saws, welders*,
and other hands-on tools, in addition to a host of oscilloscopes,
high-end soldering irons, and other EE prototyping tools. It’s a
member-run creative haven and build-anything-you-want,
if-you-break-it,-fix-it space.
*currently out of operation, we’re working on fixing

Key Dates:
* Oct 11 — Last day of Columbus weekend — application deadline
* Oct 14 — Winners notified
* Dec 16 — (tentative) MEETERS (MITERS End of Every Term Research Showcase)

Terms:
* Undergraduate (any school, as long as you come hang out at MITERS)
* Work on the project at MITERS as much as possible
* Present at MEETERS (probably Dec 16th)
* Maintain good documentation of their work as you progress. On your
website or on the MITERS website is fine. (this is good for your
future/present portfolio too)

Judging: Names will be stripped from proposals, then I’ll email
everyone on the miters-keyholders list (about 20 people) for voting
and discussion (coolness / technicality will come into play here).
Final decisions will be made at general meeting Friday Oct. 14th
(affirmative action in encouraging new makers / underclassmen will
come into play here*), and winners notified by that Saturday (Oct
15th).

*Yes, I am explicitly stating that you should not be intimidated by x
crazy project you see on the MITERS site. All you really need is
enthusiasm for making things — the rest will come naturally as you
ask people at MIT / MITERS for help with your crazy idea. ūüôā

===FAQ===
Why: We are funding this to convince more people to join MITERS and/or
build things.

Money distribution: You would come to Friday build parties (every
Friday @ 7pm @ MITERS) and pull up website(s) for us to order your
parts from. This way we cut through the reimbursement craziness and
don’t even step near cash-grant sinkholes. If you absolutely want your
part but can’t make it, I’ll create a spreadsheet doc that our
treasurer, tylerc, can check.

Build parties: Basically, a bunch of people who like making things
comes to hang out at MITERS. No dancing involved [yet].

Majors: We don’t care what major you are. And we’re definitely not
pure 6-1. We’re self-funded, so not directly tied to any department.

Questions? Email nouyang at mittt or miters-keyholders at mittt

If you want a copy of what you submitted here, just email me and/or
save it elsewhere before you submit.

Cheers,
–Nancy Ouyang